December 2015 Firmware - Official Thread

[djpip27]

Please post feedback on the December 2015 Firmware here.

[cabayazzo]

I am Happy to Inform, that my PMD, is up and Running with two Upgrades:
60Gig SSD
New Firmware
Waaay More Stable!!
Still finding out the new upgrade details on this new Firmware, but I am pretty sure it will run flawless!
You Guys have made my entire Year!
MUUUCHAS GRACIAS!!!
From Monterrey Mexico!

[NyRo]

Hi everybody,

Since updating the new firmware I encountered a problem twice when starting the device.

The boot normally starts with first all buttons that light up briefly, then Pacemaker logo appears, then the color wheel. After that, my pacemaker froze with the lights of the left runway and the fader.

Having tried everything to revive it (stop/start, various combination of buttons ...), the only solution was to turn it off completely by long pressing the 'Setting' button, and then reinstall the firmware via PMD Updater.

Between these two incidents, my Pacemaker worked very well and works fine again ... but I'm a little anxious at every startup.

++
Ronan

[Philip Dsouza]

Hi Everybody!
My PMD just semi bricked after dec 2015 firmware.At first the error 0201, then after long press could switch off. When I switched on again, only the lights come on, no screen.
Even does not show on my computer. Tried every thing,....please help help...need my PMD day and night.
Thanks
Phil

[Sox]

viewtopic.php?f=20&t=3093&p=3514&hilit=bricked#p3514

[culman]

any problems updating firmware 2015 via mac? is there a guide?

[Sox]

I have no mac and have no idea (and only me appears to respond unfortunately).

There is no mac version of PMUpdater so you have to do it the manual way. There are some instructions somewhere (I could look, but then so could you).
If nothing else there is some info or a link to some info on the firmware link of the main website (ie. not the forum?), or used to be

[Terzonoff]

Hi!
I too have the same problem of Nyro. It happened several times. The only solution is to reload the latest firmware. All previous settings are lost.
I made a video, can i post it?