How To..... Recover A Bricked Unit

Step-by-step instructions on how to....
Post Reply
Sox
Admin Sox
Admin Sox
Posts: 347
Joined: Fri Sep 14, 2012 9:25 pm
Location: Bath, England
Contact:

How To..... Recover A Bricked Unit

Post by Sox »

In the first instance I would attempt to reformat the drive which will restore factory defaults.
viewtopic.php?f=20&t=62
I'm not totally sure, but this may also put down the factory fitted software. Perhaps the next person to try this can confirm?


If that doesn't help then you can try a restore via DFU mode.
See info in this thread viewtopic.php?f=21&t=140&hilit=dfu&start=20
Never experiment with drugs.... you might waste them
rickwwallace

Re: How To..... Recover A Bricked Unit

Post by rickwwallace »

Once you format the harddrive there is nothing. You will get the message the harddrive has been reformatted please upgrade your firmware. It will not do anything until you put the firmware back on it.
Sox
Admin Sox
Admin Sox
Posts: 347
Joined: Fri Sep 14, 2012 9:25 pm
Location: Bath, England
Contact:

Re: How To..... Recover A Bricked Unit

Post by Sox »

From another thread
djpip27 wrote:If you do end up doing DFU programming, leave the device connected to the PC until it boots. You may only see the play button blink for a long time before anything happens.
Never experiment with drugs.... you might waste them
Post Reply